Several reasons, such as power settings, faulty hardware, or driver issues, can cause a monitor to go to sleep mode. Here are some steps to fix the issue:
- Check power settings: Go to your computer’s power settings and make sure that the monitor is not set to turn off after a certain amount of time. You can also check the settings on the monitor itself to ensure that it is not set to go into power-saving mode.
- Check hardware connections: Make sure that the monitor cables are properly connected to the computer and that the connections are not loose. A loose connection can cause the monitor to go into sleep mode.
- Check for driver updates: Make sure that your monitor drivers are up to date. Go to the manufacturer’s website and download the latest drivers for your specific monitor model.
- Adjust your graphics card settings: Go to your graphics card settings and make sure that the refresh rate and resolution settings are compatible with your monitor. If they are not, adjust them to the correct settings.
- Test your monitor on another computer: If the above steps do not resolve the issue, try connecting your monitor to another computer to see if it goes into sleep mode. If it does, then the issue may be with the monitor itself, and you may need to contact the manufacturer for assistance.
By following these steps, you can troubleshoot and fix the issue of your monitor going into sleep mode.
Table Of Contents
- 1 Why does my Monitor keep Going to Sleep? – A Complete Guide.
- 2 Why Does My Monitor Keep Going To Sleep Windows 10?
- 3 How to Fix Your Computer When It Says Monitor Going to Sleep?
- 4 Why Does My Monitor Keep Going Black?
- 5 Dell Monitor Keeps Going to Sleep
- 6 Second Monitor Keeps Going to Sleep Windows 10
- 7 HP Monitor Keeps Going to Sleep?
- 8 VGA No Input Signal Monitor Going To Sleep
- 9 CONCLUSION
Why does my Monitor keep Going to Sleep? – A Complete Guide.
The screen goes blank, and there’s a good chance you may lose data. With different versions of the Windows operating system, the screen saver feature is accessible. Your system’s features stop operating when the graphics card driver is outdated. This is a significant contributor to the problem.
Why Does My Monitor Keep Going To Sleep Windows 10?
Many customers are frustrated by this little issue. If your system goes to sleep randomly, it’s most likely due to a misconfigured option in Windows. However, you’ll have to figure out which option is causing your computer to go to sleep suddenly. I’ll go over the various options here, so you don’t have to.
Troubleshooting 1 – Use the Power Troubleshooter to discover what’s wrong with your computer.
Step 1 – Go to the Windows Settings menu. You may utilize the Win + I keyboard shortcut.
Step 2 – Select Update & Security from the drop-down menu.
Step3 – From the left pane, choose Troubleshoot.
Step 4 – Under Find and solve additional problems, locate and click on Power.
Step 5 – Then, on the Run, the Troubleshooter button appears, click it.
Troubleshooting 2 – Change the Screensaver’s Options
Options for the Screensaver can be changed. If you recently changed your theme or screensaver, specific settings on your laptop may have changed, leading it to sleep. It is preferable to examine the current settings and then make appropriate changes.
Step 1 – Select Personalization from the context menu by right-clicking on an empty place on the desktop.
Step 2 – From the left-hand menu, choose Lock screen.
Step 3 – From the right pane, choose Screen saver settings.
Step 4 – Increase the Wait time to a larger figure, 20 minutes or more. To save your changes, click Apply and OK.
Troubleshooting 3 – Restoring the Power Plan’s Configuration
Step 1 – Menu search, type, and enter power settings in the start menu. From the search results, select Power & sleep settings.
Step 2 – Select Additional power options from the right pane’s Related settings.
Step 3 – On your computer, you should now be able to see all of the power plans. Locate the power plan you want to change and click Change plan settings next.
Step 4 – For such a plan, select Restore default settings.
Troubleshooting 4 – Hybrid Sleep should be turned off.
Hybrid Sleep was created with desktop PCs in mind. In this mode, Windows saves any open documents and applications in memory and on your hard disc before turning off your computer and allowing you to resume your work immediately. However, turning it off may be a smart diagnostic step if this is known to create difficulties with your device.
Follow the following steps to turn it off:
Step 1 – Control Panel may be accessed from the desktop or a Run window.
Step 2 – Choose between Small and Large icons. Select Power Options.
Step 3 – Locate the power plan you want to change and click Change plan settings next to it.
Step 4 – A new window should pop up once you choose Change advanced power settings.
Step 5 – Look for Sleep in this area. Select Allow hybrid sleep from the drop-down menu and turn it off.
How to Fix Your Computer When It Says Monitor Going to Sleep?
Currently, monitors can switch down the display or screen to save power. While this is a beneficial feature, it may also be dangerous if the setting is incorrect.
Firstly, to resolve the issue of the screen going to sleep when the computer is turned on, you must first conduct a clean boot on your computer and then analyze the problem step by step.
Another thing that one can do is reset your BIOS to its default settings and to do it, follow the steps:
Step 1 – To enter BIOS setup, switch on your system, then concurrently press F2, DEL, or F12, depending on the system.
Step 2 – You’ll need to locate the Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or some similar feature to load the default configuration.
Step 3 – Use your arrow keys to select it, then hit Enter to finalize the procedure. The default settings in your BIOS will now be used.
Step 4 – Once you’ve signed in to Windows, try if you can resolve the issue of the screen going to sleep when the computer is turned on.
Why Does My Monitor Keep Going Black?
The problem with the cords connecting your display to your computer is the primary cause of it going dark for a few seconds. If your monitor goes black for a few seconds and then comes back on, this is most likely the problem.
The first step is to double-check that all of your cords are correctly plugged into, both to the back of your display and the device to which it’s attached.
Ensure that the ports on the back of your monitor aren’t damaged, as this is a typical source of black displays. It would help if you also inspected your plug socket and monitor’s plug since any damage to these might be the root of your problem.
In an ideal case, once you’ve examined the cords for any damage, you’ll also verify the display using a different cable. Assuming you have another HDMI cord (if that’s what you’re using), you’ll want to double-check with your devices.
A problem with your video card drivers is another possibility. If you believe there is a problem with your gadget, the best thing you can do is update it.
Even though it’s improbable, it’s possible that your GPU has reached the end of its life cycle and is about to die. This will not be the case in a new device, but it is still possible if you have an exceptionally old laptop or computer linked to the display. If this is the case, your graphics card may need to be replaced.
If you believe there is a problem with your gadget, the best thing you can do is update it. If your display goes black for a few seconds and then comes back on, this is most likely the problem. You should also inspect your plug socket and monitor’s plug since any damage to these might be the root of your problem.
Dell Monitor Keeps Going to Sleep
Follow these procedures to disable the Monitor Deep Sleep Mode:
Step 1 – To access the On-Screen Display (OSD) Menu, press Button 3.
Step 2 – Use Button 1 or Button 2 to draw attention to Others. To pick the choice, press Button 3.
Step 3 – Disable the Monitor Deep Sleep option by pressing Button 3.
Step 4 – In the On-Screen Display (OSD) Menu, watch the Deep Sleep Mode.
If you’re still having difficulties sleeping because of your display, go through the rest of the sleep troubleshooting steps.
Second Monitor Keeps Going to Sleep Windows 10
Some Power Options settings in Windows 10 may be wrongly set up if your second monitor goes into sleep mode. We recommend resetting all power settings to default and seeing whether the second monitor still goes to sleep after being connected. Here’s how to get your power settings back to normal:
Step 1 – To enter the Settings app, press the Windows logo key + I.
Step 2 – Select System > Power & sleep from the Options menu, then Additional power settings.
Step 3 – Select Choose when to turn down the display from the Power Options dialogue box, then Restore default settings for this plan.
Check to see whether the problem still exists after changing it to default. Please attach the second monitor to a different computer to check if the problem persists if this is the case. Also, please use a different HDMI cable to rule out the possibility of a defective HDMI cable.
HP Monitor Keeps Going to Sleep?
To alter the computer’s power settings, use the Power troubleshooter. The timeout settings, which govern how long the computer waits before shutting off the monitor display or entering sleep mode, are checked by the Power troubleshooter. It’s possible that adjusting these settings will solve the problem.
To stop your HP from going to sleep, follow these:
- Using the mouse or the Spacebar, move the cursor around the screen.
- If the computer does not wake up, press the Suspend key on the keyboard.
- If the computer still won’t turn on, push and release the Power button on the computer casing for one second.
VGA No Input Signal Monitor Going To Sleep
Because many technical difficulties may be remedied by restarting, it’s never a bad idea to restart and reconnect your devices. This is sometimes sufficient to resolve difficulties such as no VGA signal.
- Unplug your computer and monitor’s power wires and turn them off completely.
- Take a few minutes to wait.
- Reconnect the VGA cable to your computer and display.
- Reconnect the power cord.
- Make sure your computer and display are both turned on.
Check to see if the VGA connection is working.
CONCLUSION
That’s all there is to it. You now know how to cure your monitor that keeps going to sleep or issue on your device by utilizing one or more of the solutions provided here. Hopefully, through our article, “Why does my Monitor keep Going to Sleep? – A Complete Guide”, you should have understood why your monitor keeps going black and how to fix it.