There’s nothing as frustrating as a poor internet connection, especially when it hinders you from connecting and watching your smart TV. Stable Wi-Fi connectivity is vital because it allows you to maximize the exciting features of your LG smart TV.
Internet connection offers you access to movies and TV shows through various streaming apps. Also, it allows you to connect the TV to an external display via stream casting.
If there’s no Wi-Fi connection on your LG TV, don’t worry. Some reasons why it happens are:
- Too many devices are connected to the same network
- The router/modem is faulty
- The LG TV might be far from the router
- There can exist items in the house to cause the interference
- Wrong LG TV time zone settings
- Maybe you entered an incorrect Wi-Fi password
Below are the top recommendations to help identify and fix the LG TV not connecting to the Wi-Fi problem.
Why Won’t Your LG TV Connect to Wi-Fi?
Table Of Contents
There are several reasons why your LG smart TV won’t connect to Wi-Fi, and you need to check them off one after the other to identify the problem. You can remedy most of these issues by rebooting the TV or router, but it could sometimes be an issue with the internet service provider.
On rare occasions, the problem may stem from faults in the physical hardware on the TV or home network. If it’s the first time you’re trying to connect to a network, confirm you have the right network and that you’ve typed the password accurately.
How to Fix LG TV Not Connecting to Wi-Fi
Now that your LG TV won’t connect to Wi-Fi, let’s help you fix the issue. Try out the first six steps; if all fails, you can follow the remaining steps.
1. Power Cycle the LG TV
This process will reset the TV and might fix the Wi-Fi problem.
- Unplug your TV from the electrical outlet.
- Wait for one minute.
- Plug the TV in again.
2. Restart the Router
A router may develop connection issues when left to run for long periods. Sometimes a power cycle is all you need to sort out the problem.
- Unplug your router from the electricity source.
- Wait for a minute.
- Plug it back in.
- Allow the router to establish a connection.
- Leave the router plugged in.
- Identify the reset button.
- Press the reset button for 30 seconds.
- Release it and wait for it to power back.
3. Change the Date and Time Settings
Although it sounds weird, some people swear by it. All you need to do is manually reset your TV to the local time and date. Also, ensure you disable the TV’s automatic setup for time and date.
4. Switch to 126.96.36.199 from DNS Settings
Changing DNS settings might help. Follow the instructions below:
- Open settings, then go to all Settings.
- Choose the network, and proceed to Wi-Fi Connection/Wired Connection (Ethernet).
- Select the status “Connected to the Internet.”
- Click to edit the current DNS server setting.
- Click to uncheck the Set Automatically button.
- Choose DNS Server.
- Enter 188.8.131.52
- Save the changes
5. Simplink Features/Turn Off Quick Start
Some features on the TV may interfere with the connectivity. Try to change some settings to see if it’ll make a difference.
- Go to settings from the remote.
- Proceed to all settings.
- Click on general.
- Quick Start
Once you’re done, turn the TV off for a minute, then turn it back on.
6. Straighten Wires Leading to the Wi-Fi Module
All you need to do with this solution is to locate the Wi-Fi module and gently straighten the bent Wi-Fi module cables.
7. Factory Reset
If you’ve already power cycled the router and TV and adjusted all other settings as mentioned earlier, and there’s still no change, reset the TV to factory settings. This process will take the TV back to the initial settings when it was new. Remember to back up all the essential documents before the procedure.
8. Check the Wi-Fi Details
Confirm if the Wi-Fi details are correct before starting to poke the TV. Check whether other devices are connected to the Wi-Fi network. Find out if the router has a set number of maximum connections.
If the number is higher than allowed, it won’t connect. You should turn off the devices, not in use and see if it helps.
9. How to Connect LG TV to Internet With Ethernet Cable
Connect the TV directly to the router using an ethernet cable. This method also allows you to determine the root cause of the challenge. If the TV still doesn’t connect, then the problem might not be the Wi-Fi connection but the TV.
10. Confirm Your Software is Up To Date
There are times when software updates might fix the problem. Go to the TV settings and check available updates, then install them.
Other options to try include:
- Purchasing a streaming stick
- Disconnect any USB sticks
- Check for interference from electronic devices like microwaves or routers on the same frequency.
How Do I Reset My LG Smart TV Wi-Fi?
The simplest way to reset the Wi-Fi on your smart TV is to switch off the TV.
To ensure you’re thorough with the process, disconnect the power supply and leave it for up to two minutes to power down correctly.
How to Connect My LG TV to Wi-Fi
Here’s how to connect your smart TV to Wi-Fi:
- Power on the TV
- Go to Settings
- Click on the Network submenu, then choose start connection
- Enter the password once prompted
Once that’s done, you’re good to go.
Why Won’t My LG TV Connect to My Wi-Fi?
If the internet connection works well with other devices, the TV may have a problem (try the above solutions).
It’s also possible, though rare, that multiple devices are connected to the home network, causing the TV not to connect.
The best cause of action when your LG smart TV doesn’t connect to Wi-Fi is to perform a power cycle on the TV. Repeat the process with the router, and you’ll most likely fix the problem.
Alternatively, reset the TV to factory settings. The last option is straightening wires from the LG TV Wi-Fi module. If all the options don’t work, maybe it’s time to take the TV to the repairman.
Remember, power cycling works most times than you might imagine.