Are you looking for a way to blast out your favourite music without those pesky wires? Then you would definitely want to get a Bluetooth speaker. But while this is the more flexible solution, most Bluetooth speakers do not boast the same power as other speakers out there.
This does not mean, however, that you cannot improve on your Bluetooth speaker’s performance. All you need to do is to figure out a way to boost its volume.
Why Buy A Bluetooth Speaker?
Bluetooth speakers utilize wireless technology. This means any device that has Bluetooth connectivity can be connected with these speakers, like your smartphone or laptop. You can play music stored on these devices with a simple click of a button. This is a considerable improvement over traditional speakers that have specific ports and wires that may not be compatible with many devices like your phone.
Because of this, a Bluetooth speaker is a better option for your home, whether it is for your theatre or just to play music at any part of your home. You can simply carry it from one room to another when you need to, although you can install it permanently in one place like you would do with a normal speaker.
Another huge advantage is that you only need batteries for your Bluetooth speaker. You can bring it with you to the beach, the park, and basically, anywhere you do not have access to electricity. Despite this, you can expect top-quality sound.
Lastly, a Bluetooth speaker is quite an affordable option to play music out loud.
How to Make A Bluetooth Speaker Louder
Bluetooth speakers do not have the same performance as plugged-in speakers because they are smaller and reliant on battery power. Still, it does not mean that they cannot be used in big rooms or wider areas. All you need to do is to follow some simple hacks.
1. Check The Room Area
Did you know that you can make your speaker louder simply by using it in an appropriate-sized room? If you plan to use your Bluetooth speaker in a huge, open room, then you should not expect the impossible. The sound waves will simply spread out too far to be heard properly. Thus, you need to check out the size of the room first and foremost.
Once you do, you will be able to find the right spot to place the speaker. Consider that walls make sound volume higher because the sound bounces off of them. On the contrary, open space will only result in the sound moving further away. When you study the space, you can also control the volume of the Bluetooth speaker.
2. Place It On The Floor
Have you ever placed speakers on the floor before? If not, then you should try it out on your Bluetooth speaker right away! It might not be the most common location for speakers, but it is one of the easiest and most effective ways to make it louder.
There is a scientific reason for this. When a wireless speaker is placed on the ground, vibrations are more able to naturally flow. The result is clear and unfiltered sound. This is also a good trick for parties where people chat with each other. When it is placed on the floor, background music can be played but it will not be too overwhelming or loud that people cannot talk to one another. In general, for the best results, put your Bluetooth speaker on the floor right in the middle of the room.
3. Place It Against A Wall or Close To The Corner of the Room
Do you know that your walls can act as an amplifier of sound? In fact, this is one of the most natural ways to boost the volume of your Bluetooth speaker if you are not into buying extenders. You can enjoy up to 25% more of the highest volume level by placing the speaker in the perfect spot.
This number can vary, however, based on the distance from the wall and the type of your walls. You should also consider any furniture in the same room that may distort or weaken the sound, like couches.
The ideal setup is an empty room so that the vibrations from the speaker bounces on the walls and become amplified. If possible, two walls (or a corner) is much better. By putting your Bluetooth speaker on a corner, you can boost the volume by up to 40%! Again, you need to make sure that it is placed within the right distance from the wall to enjoy this boost. Of course, to get better results, it should be placed on the floor.
The easiest thing to do is to simply try placing the Bluetooth speaker in different corners or parts of the room and testing it out. This way, you will discover the perfect spot within the room where you can get a clear and loud sound.
4. Get Two Speakers
If one speaker is simply not enough to give you the sound quality and volume you require, you might need to use a second one. This is also the easiest solution if you have a big crowd or an open room where one speaker is just not enough. You can opt to borrow one unless you need the extra volume regularly.
5. Figure Out What Causes Low Volume
There can be non-speaker related reasons why your sound quality is not what you desired. It can be that the music is not suitable for the speaker or creates a dull sound. The Bluetooth speaker itself might have issues. Check the volume control if it’s turned up. Find the best equalizer/sound settings on your music player. Basically, if you have tried the previous tips above and still see no improvement, then there might be some other issues worth looking into.
Do you love music and love high-quality sounds coming out of your Bluetooth speaker? Then choosing the right model is not enough. You will need to know where and how to position it properly to make it louder and to play your favourite songs just like you were listening to the band live.
Originally posted 2020-04-22 13:34:05.