If your projector features mediocre speakers, going for external speakers is your best option for getting quality sounds. To get the sound from the projector to the speakers, consider these two main options;
Getting sound from the projector to the speakers through a receiver
- Power off the projector and speakers
- On the projector, locate the audio output jack
- Connect the audio source to a receiver using an HDMI cord
- Connect the receiver to the speakers
- Turn on the equipment and test
Getting sound from the projector to speakers directly
- Turn off all the equipment
- Locate the audio out jack on your projector
- Connect one end of the cable to the projector and the other to the speaker
- Power on the equipment and test
Table Of Contents
- 1 Getting Sound From Projector to Speakers: A Simple Step-By-Step Guide
- 1.1 Getting Sound From the Projector to the Speakers Through a Receiver
- 1.2 Step 1: power off the projector and speakers
- 1.3 Step 2: Locate the Audio Output Jack on the Projector
- 1.4 Step 3: Connect the Audio Source to a Receiver using an HDMI Cord
- 1.5 Step 4: Connect the Receiver to the Speakers
- 1.6 Step 5: Turn on the Equipment and Test
- 1.7 Getting sound from the projector to the speakers directly
- 1.8 Step 1: Turn off all the Equipment
- 1.9 Step 2: Locate the Audio Out Jack on your Projector
- 1.10 Step 3: Connect One End of the Cable to the Projector and the Other to the Speaker
- 1.11 Step 4: Power on the Equipment and Test
- 1.12 Getting Sound From Projector to Speakers Wirelessly
- 1.13 Getting Sound From Epson Projector to Speakers
- 1.14 Getting Sound From a Soundbar to a Projector
- 1.15 How to Connect 5.1 Speakers to a Projector
- 2 Common Problems When Getting Sound From Projector to Speakers
- 3 How to Get Sound From Projector tv to Speakers
- 4 How to Get Sound From Projector to Speakers FAQs
- 5 Conclusion
Getting Sound From Projector to Speakers: A Simple Step-By-Step Guide
Projector setup is usually not a walk in the park for many people. However, the biggest hurdle is getting the projector’s audio running. Luckily, this article has put together a simple but detailed step-by-step guide on getting sound from the projector to the speakers under different setups.
Getting Sound From the Projector to the Speakers Through a Receiver
Step 1: power off the projector and speakers
Having your equipment turned off before starting the process should not be taken lightly. First, it protects your equipment from getting damaged and, most importantly, you from getting shocked. Second, it saves you from the irritating speaker feedback noises once everything is up and working.
At this point, ensure the arrangement is on point by strategically placing your projector, receiver, and speakers. Additionally, have a sitting area and screen area figured out before you begin the setup, as it will give you an idea of where to place the speakers.
Moreover, assembling all your components will give you an idea of how many cables you will need and a suitable length. Trust me, arranging everything before the setup will save you headaches and frustrations.
Step 2: Locate the Audio Output Jack on the Projector
The audio jack is located in the same place as other connection ports on the projector for most models. Besides, it is usually clearly labeled, so finding it would t be a hassle. However, if the projector is ceiling-mounted, consider pulling it down to access the jack and plug in the cables easily.
Step 3: Connect the Audio Source to a Receiver using an HDMI Cord
Connect your HDMI cord to the audio output jack on your audio source. Then, connect the other end of the cord to the corresponding jack on your A/V receiver.
Step 4: Connect the Receiver to the Speakers
Connect your speakers to the receiver through the coaxial cable or speaker wires. A coaxial cable has a greater bandwidth hence supporting higher sound quality.
Step 5: Turn on the Equipment and Test
Confirm if you have plugged in all the cables, as explained in steps 3 and 4. For example, suppose you power your AV receiver, set it up, and adjust the volume through the speakers.
Note: In this process, the AV receiver is the core of your system. It enables a smooth pass-through of the video and audio signals. The projector gets the video signals from the receiver, while speakers receive audio signals from the receiver.
Getting sound from the projector to the speakers directly
Connecting the projector to the speakers is the simplest way of getting your audio up and running in minutes.
Step 1: Turn off all the Equipment
As mentioned earlier, turning off your projector and speakers prevents them from getting damaged and you from getting shocked.
Step 2: Locate the Audio Out Jack on your Projector
The audio out jack on your projector is located in the same spot as the signal input and power ports.
Step 3: Connect One End of the Cable to the Projector and the Other to the Speaker
Hold one end of your cable and insert it into the projector’s audio-out jack port and connect the other end to the speaker.
Step 4: Power on the Equipment and Test
Confirm if you have connected everything correctly and powered on the equipment. You should get clear audio from the projector to the speaker. Adjust the volume to your liking and secure the cables safely.
Getting Sound From Projector to Speakers Wirelessly
If you are not so good with audio cords and want to avoid the hassle of knowing which goes to which port, go wireless and choose a Bluetooth speaker instead. A Bluetooth speaker pairs directly with your projector. Here are the simple steps to follow;
Step 1: Turn on the Bluetooth speakers and activate the pairing mode.
Step 2: Go to the setting menu on your projector and search for the speaker from the list of
Step 3: Enter the pairing code if needed and accept the connection.
Step 4: Confirm if the projector and speakers are on if you encounter a weak signal. Move the
speaker nearer to the projector until you get the desired signal. Check the instruction manual for guidelines if you use a Bluetooth transmitter.
Note: Your projector and speaker should be Bluetooth enabled to achieve a wireless connection. You can still connect your projector to Bluetooth speakers using a Bluetooth transmitter. To do so, switch on your projector and open the transmitter. Then, your projector will start searching for Bluetooth signals. This step prepares your projector to transmit sounds to the speakers wirelessly.
Getting Sound From Epson Projector to Speakers
Although most Epson projectors have built-in speakers, they usually offer low-quality sounds. So, to boost your audios, we recommend you connect your Epson projector with external speakers in these easy steps;
Step 1: Connect your audio source to your projector. Ensure all devices are turned off when doing so.
Step 2: Turn on your projector and move to the menu system. Move to the standby mode setting.
Select “communication on.”Epson projectors are usually on standby mode when turned
Step 3: Locate your speaker cables and connect one end to your speaker
Step 4: Connect the other end to the projector’s audio out port. Once connected, the in-built
speakers will be disenabled automatically.
Note: Epson projectors come with an audio out port, which deliberately enables a seamless connection with external speakers.
Getting Sound From a Soundbar to a Projector
Connecting your projector to a soundbar is possible. However, both devices must have compatible ports. For instance, both devices must have an HDMI port if you choose to use an HDMI cable.
Step 1: Put off all your devices
Step 2: Connect the HDMI cable to the projector
Step 3: Plug the other end of the cable into the HDMI port on the soundbar
Step 4: Turn on the devices
Step 5: Set the HDMI channels you are connected to on both devices
Step 6: Test and reset the sound
Note: If your projector does not have an HDMI port, check the manual to see if it is Bluetooth-enabled and pair it wirelessly with your Bluetooth soundbars.
How to Connect 5.1 Speakers to a Projector
Step 1: Place your 5.1 speakers in the position you want them to be and plug them into a power
source(do not power on). If you are using wireless speakers, install fully charged batteries.
Step 2: Connect your audio cable to the projector’s audio-out port
Step 3: Connect the other end of the cable to the 5.1 speakers.
Step 4: Power on your devices and adjust the volume.
How to Connect Soundbar to TV without Optical Cable? (Simple Steps)
Common Problems When Getting Sound From Projector to Speakers
It can be frustrating having gone through the process of connecting your projector to your speakers and getting no sound. There could be several issues that could have gotten in the way. Here are some of the challenges and how you could solve them.
If any cables are loosely connected, you will not get any sound from your projector. To solve the problem, you must unplug all the cables and plug them back securely.
Start with the cable that connects your video and audio source to the projector and plug it back in. Next, move to the cables that connect to the receiver and those connected to the speakers. Ensure non of the cables are not loosely connected. Finally, turn on your equipment and test again.
Wrong Connection Type
Check if you use a VGA or RCA cable to connect your audio source and projector. VGA and RCA cables do not support audio transmission. This is because they are solely designed to support video transmission.
However, you can get your audio if you replace RCA cables with left and right-channel RCA cables. Using a VGA connection, use an additional 3.5mm audio cable. VGA cable. Insert both cables into the VGA port in your audio/video source and the other end to your projector.
You will experience sound cuts if you use broken cables. To solve the problem, consider replacing the cables with quality ones. Again, choose cables with low resistance for quality sounds.
Muted Volume From Your Audio Source or Projector
If you have muted or turned down the volume from your audio input device, you will be challenged getting the sound from the projector to the speakers. So, check your video/audio source and adjust the volume.
On the other hand, if your projector is on low volume or is muted, your speakers will not receive any sound. Adjust accordingly and test again.
Wrong Speaker Input Settings
Check if your receiver can switch between several audio inputs. If so, you could use an audio input that is not connected to your projector. Look for the one associated with your projector and switch to it. If you cannot trace it, plug your projector into each input and switch to the next until you find the correct one.
How to Get Sound From Projector tv to Speakers
You can get sound from your projector TV to your speakers in several different ways. The most common way is to use an HDMI cable. You can also use an optical cable or an analog cable. If you have a newer TV, you may be able to use Bluetooth to connect your TV to your speakers.
If you want to use an HDMI cable, you will need to connect the HDMI port on your TV to the HDMI port on your speakers. If you are using an optical cable, you will need to connect the optical port on your TV to the optical port on your speakers. If you are using an analog cable, you will need to connect the red and white audio ports on your TV to the red and white audio ports on your speakers.
If you have a newer TV, you may be able to use Bluetooth to connect your TV to your speakers. You will need to enable the Bluetooth feature on your TV and pair it with your speakers.
Once it is paired, you should be able to get sound from your TV to your speakers. These are the most common ways to get sound from your projector TV to your speakers. If you have any other questions, please feel free to ask.
How to Get Sound From Projector to Speakers FAQs
My Epson Projector’s Audio Out Is Not Working. What Should I Do?
Check if you have connected the audio cable to the right projector and video source port. If everything is in order and you are not getting any sound, disconnect and reconnect the audio cable. Ensure you are using no resistance cables. Check the cable’s ohms rating(the rating ranges from 3 to 15 ohms). A high resistance affects the system’s performance, so you are not getting any sound.
Do Projectors Have an Audio Out?
Most projectors come with low-quality in-built speakers; hence you may require an external audio solution. In such a case, audio out comes in handy because it drives signals into the speaker’s audio input. However, modern projectors do not have an audio out as they come with powerful speakers that sound way better than the standard audio systems.
Can I Hook a Bluetooth Speaker to a Projector?
Absolutely yes. You can do so in two ways; directly and indirectly. The direct method involves pairing the speaker with a Bluetooth-enabled projector. If the projector does not have Bluetooth capability, use a Bluetooth adapter to connect the projector to the speakers indirectly.
Why Does My Projector Produce No Sound When Connected to HMDI?
First, ensure you have the latest graphics card drivers, as HMDI uses its drivers. Second, switch off your equipment and disconnect the HDMI cable. Finally, plug in the cable and put it on your equipment. Sometimes you may lose your audio if you disconnect your cable while the audio source is running. Thirdly, ensure you are using the HDMI port only on your projector. A DVI/HDMI port will not produce any sounds.
When getting sound from the projector to the speakers either directly, through a transmitter or wirelessly, give attention to details. Ensure you have not overlooked any step ad explained in our guide. Also, if you meet challenges during the setup, go through the mentioned list of problems and utilize the simple solution offered. You will be amused by how simple it is to get your projector’s sound to your speakers. Good luck!