In this article, we will explore some of the common causes of PS4 controller disconnection and provide some solutions to help you fix the problem.

How to Fix a PS4 Controller That Keeps Disconnecting:

1. Check the battery: Make sure that the battery in your controller is fully charged. If the battery is low, the controller may disconnect.
2. Reset the controller: To reset the controller, press and hold the small reset button on the back of the controller for about 5 seconds until the light bar on the front of the controller flashes.
3. Check for interference: If you’re using your controller near other wireless devices, such as a wireless headset or a Wi-Fi router, the controller may be disconnecting due to interference. Try moving the controller and other wireless devices away from each other to see if the issue is resolved.
4. Update the software: Make sure that your PS4 and controller are running the latest software. You can check for and install software updates from the “Settings” menu on your PS4.
5. Check the USB cable: If you’re using a USB cable to connect your controller, try using a different cable. The cable you’re using may be damaged or not working properly.

If these steps do not resolve the issue, the controller may need to be repaired or replaced. You can contact Sony support for more information and assistance. Read on for more details about each of the steps highlighted above.

Why Won’t My PS4 Controllers Stay Connected to My PS4?

Your PS4 controller keeps disconnecting from your PlayStation 4 console because of the following reasons:

• Your other devices are causing interference. For instance, your Wi-Fi router, tablet, smartphone, and Bluetooth devices
• Faulty USB cable
• The battery could be low
• The distance between the controller and the PS4 console

Here’s what you need to do when your PS4 controller keeps disconnecting.

Charge the Controller

The DualShock 4 controller battery can run for up to 8 hours. So when the charge is low, expect connection issues. Keep tabs on your gaming for minimal interference.

When you hold down the PS button, an on-screen indicator shows you how much juice is left in the battery.

Related: Why Does My PS5 Keep Turning Off? Reasons And Solutions

Check for Devices Causing Interference

Remember we mentioned that your tablet, smartphone, and other Bluetooth devices could interfere? Well, they could be the cause for your frustration—when they have the Bluetooth feature activated.

But how will you know your devices are the culprits? Easy.

Does the LED indicator turn white when you turn the PS4 controller on? The white color usually indicates that the controller won’t connect.

So you need to turn off the Bluetooth feature from your android or iOS devices. You should also keep the controller close to the console for a fast connection.

This fix has worked out for some gamers. We hope it works for you too. If it doesn’t, try the other fixes below.

Related: Can You Connect Bluetooth Headphones to PS4 & PS5?

The Distance Between the Controller and the PS4 Console

The typical range for the DualShock is 50 to 100 feet, allowing for use within the room and beyond. With additional dominant signals, such as a Wi-Fi router or a standalone Bluetooth device, you may notice your PS4 controller disconnecting. Connectivity problems can arise as close as 20 feet away under these conditions.

Inspect Your USB Cables

Poke the USB connector when you’ve plugged the cable into the controller. The socket or cable connector may be broken if you notice it’s loose or pulls out quickly.

You can fix the former by simply trying a different cable. But you’ll need a high-quality USB cable.

Check the controller LED indicator to know if the USB cable is working. If it lights up, that’s a good sign. But you also need to ensure the cable can maintain a data connection. So try transferring data from your computer to your phone using the cable.

If the USB cable can power and transfer data, you can now sync the PS4 controller. We’ll look into that in a few.

What if the problem is with the socket or cable connector? In that case, you’ll need to take apart the PS4 controller and repair the USB port from the inside.

Resync the PS4 Controller

Syncing your PS4 controller is an easy fix. Here’s how to resync the PS4 controller:

• Turn off your PS4 PlayStation.
• Press the little reset button that is behind the L2 button.
• Press the tiny button for up to 5 seconds using a small tool—a pin or a toothpick.
• Connect your controller to the PS4 console using the charge-sync USB cable
• Turn on your console
• Click on the PS button. Press the button continuously and wait on the beep sound.

If your controller still doesn’t work with your console, try connecting it to another one. You will need to contact the PlayStation Support Team for additional assistance if it does not work.

Why Is My Controller Randomly Disconnecting?

Your controller is randomly disconnecting because:

• The controller battery is dead. You, therefore, need to charge or order a new one
• You need to update the firmware
• You’re putting too much distance between your controller and the console
• It seems like you have a lot of devices plugged into your game system

To solve this problem, you need to:

Reset the Controller

You can fix almost all pairing problems with your PlayStation 4 controller by resetting it. So here’s how to reset your controller:

• Use a paper clip to press the small reset button below the L2 button
• Hold the button for 5 seconds.

The reset is complete. 

Now you can sync your controller with the PS4 console. Check out the previous section on how to sync the PS4 controller.

PS4 Controller Keeps Disconnecting and Won’t Reconnect

Here are more reasons your PS4 controller keeps disconnecting and won’t reconnect:

Faulty or Damaged Bluetooth Antena

A broken antenna prevents the PS4 controller from communicating with the system. The controller may keep disconnecting if the connection is unstable. Motion-controlled games on the PS4 may experience dropped connections between the PS4 controller and the console.

Compatibility Issues

You may purchase a third-party controller because you are on a budget. However, the downside of this move is that the controller may be incompatible with the PS4 console. To fix this problem, you may need to contact the controller manufacturer.

Hardware Problem

Hardware issues could result from your PS4 console overheating. Or maybe the motherboard may have overheated. Extremely high temperatures often damage console components.

When that is the case, you need to contact customer support.

You can handle most controller connection problems by doing the following:

• Try resetting your controller
• Use a USB cable to sync the controller
• Charging the controller

PS4 Controller Keeps Disconnecting From PC

Your PS4 controller keeps disconnecting from PC because of the following reasons:

Incorrect or Outdated Bluetooth Drivers

Connecting a Bluetooth device, like a PlayStation 4 controller, to a computer with out-of-date Bluetooth drivers might cause connection problems. So you can update your drivers to the most recent device or software version.

You also need to remove other Bluetooth devices from the area.

Steam Controller Settings

You can customize each controller in Steam’s Options menu. The PlayStation Configuration Support menu is where you’ll go to ensure you’ve set up the PlayStation controller correctly.

Faulty USB Cables

USB cables are prone to wear and tear. As a result, a faulty cable can cause connection problems. So if you must use a USB cable with your DualShock 4, ensure you use the charge-sync cables. Better yet, go for a Sony wireless adapter to avoid the same problems in the future.

PS4 Controller Keeps Disconnecting From PC Bluetooth

If your PS4 controller keeps disconnecting from PC Bluetooth, Consider the fixes below:

• Update your Bluetooth drivers
• Check the OS of your computer to confirm they are compatible
• Charge the PS4 controller

PS4 Controller Keeps Disconnecting From Phone

Outdated controller firmware can be the root cause of the Xbox One controller disconnection issue. The firmware on your controller should be up-to-date. But if it isn’t, you need to upgrade it. 

You can also fix this by closing the app and relaunching it. You also need to restart the controller.

Related: Getting Into Safe Mode and Why It’s Necessary For Your PS4

PS4 Controller Stops Working Mid-Game

If your controller stops working mid-game, you can update your controller or PlayStation console firmware. Here’s another trick that could work for you:

• Go to Settings
• Click on Devices
• Select Controllers
• Hit Communication Method
• Choose Use USB Cable
• Connect the USB cable to your PS4 controller.

Related: PS4 Pro vs. PS4 Slim – Which Should I Choose?

PS4 Controller Keeps Disconnecting From PS5

The PS4 controller keeps disconnecting from PS5 for the same reason it does on PS4. Please refer to the previous sections of this article for a detailed discussion of the different reasons. Follow the instructions below to solve this problem:

• Charge your PS4 controller
• Move closer to the PS5 console
• Change sleep time. That’s because the console will turn off if idle for long. Here’s how:
  • Go to Settings
  • Select Power Save Settings
  • Click on Set Time PS4 Turns Off
  • Set Media Playback and General (Applications) time separately

Why Does My PS4 Controller Keep Disconnecting From My iPhone?

When your PS5 controller keeps disconnecting from your iPhone, it’s likely because:

• The controller has a low battery.
• The controller firmware is outdated.
• Other Bluetooth devices are interfering with the connection.

To crack the code, you’ll need to:

• Update controller firmware
• Make sure other Bluetooth devices aren’t in the area
• Check battery status

The post PS4 Controller Keeps Disconnecting – Reasons And Solutions appeared first on The WiredShopper.

While you must have seen a vertically lying PS5 everywhere, it’s not the only way to position it on your gaming desk. You can also position your PS5 horizontally using the stand included in the package, which also happens to be the “safest” position for the console.

Read on to know why it’s so and the steps to turn your PS5’s orientation from vertical to horizontal. 

Is The PS5 Safer Vertically Or Horizontally?

Your PS5 is safe both vertically and horizontally. However, there’s a catch. 

If you intend to use it for a short duration, it doesn’t matter how you place it. Both vertical and horizontal orientations are good, provided sufficient space is available. 

Conversely, if you’re planning to use it for an extended period, i.e., for a long gaming session, you better lay the PlayStation sideways. This is because of a major design flaw, as claimed by many reports and, of course, some PS users. 

Note: This design flaw isn’t reported in all PS5 models but only in some. 

The design flaw relates to the liquid metal layer between the PS5’s Accelerated Processing Unit (APU) chip and the heat sink. When kept upright for long periods, this liquid metal tends to flow out from its place. As a result, the console’s ability to manage the heat from the APU is compromised, simultaneously damaging the processor. 

Sometimes, the liquid metal may drip on the surrounding sensitive components, resulting in a short circuit as it conducts electricity. 

You can refer to this video to better understand the above things, as explained by a YouTuber called TheCod3r. 

To summarize, it’s better to keep your PS5 sideways, firmly attached to its stand, to prevent any damage. Below are the steps to turn your PS5 sideways. 

Related: PS Plus August 2023 Games List

How Do I Turn My PS5 Sideways? 

Follow these steps to turn your PS5 sideways safely. 

• Shut Down Your PS5 & Unplug Everything 

This is the most important step most users neglect, but you shouldn’t. Shut down your PS5 and unplug everything. 

To shut down your PS5, press the PS button on the controller. A quick menu will open at the bottom of the screen. Select the Power icon at the bottom. 

Choose the second option here, i.e., Turn Off PS5.

Once shut down, unplug all the cables attached to the PS5’s back. For example, HDMI cable, power cable, etc. 

• Remove The Vertical Stand 

Gently lay down your PS5 on the sides to access its vertical stand. At its center, you’ll find a screw. Use a coin or any flathead screwdriver to unscrew this single screw. The stand will come off. 

Tip: Once done, secure this screw in the small compartment on the side of the base. It’s there for this purpose only! 

• Rotate The Base 

Now, rotate the base while looking at it from the top. If you treat the raised portion of the PS5 stand as “12 o’clock,” rotate its outside piece to “10 o’clock.” You won’t be able to rotate the base further as it clicks and gently stops. 

This will make it fit the PS5 in its horizontal position. 

• Clip The Stand In The Horizontal Position 

You can now attach the stand (taken out from the upright PS5) while it’s sitting horizontally. Before doing so, make sure the PS logo is facing up. 

On the back of your PS5, close to the twin USB ports, some PlayStation controller symbols are imprinted. 

Insert the outside arms of the base (that you just rotated) around where these symbols end on each side of the console’s body. 

Gently push the clips to secure them. That’s it. Your PS5 is now horizontal. Replug the power cables and turn on your console. 

Note: If you wish to reverse the position of your PS5, just follow the above steps in reverse order. 

Related: Is Discord on PS4 or PS5 – Full Integration in 2023

What Is The Best PS5 Stand?

The stand that every PS5 comes with is just meant for stability. Nothing else! It doesn’t feature cooling fans or a charging port for your PS5 controller. If you want these two functionalities and more, I recommend investing in a “proper” PS5 stand like this one – OIVO PS5 Horizontal Stand.

Designed for both PS5 Disc & Digital Edition, the stand costs under $40 and is a perfect value-for-money product. I’ve been using the OIVO PS5 Horizontal Stand for the last 4-5 months and am, thus, confident about it. 

Besides its stability, I liked the stand’s 2 PS5 controller chargers and 4 USB charging dongles that keep my controller up all the time. Thus, I don’t need to worry about plugging my controller for a charge every time I decide to play. 

In addition, there are twin built-in silent cooling fans that rotate at an amazing speed of 4000 RPMs to keep overheating at bay. Also, these fans have blue LED lights installed that create a better gaming environment when turned on. Isn’t it cool? 

So, what are you waiting for? Order your OIVO PS5 Horizontal Stand now!

Related: Can I Play PS3 Games On PS5? Yes, And Here’s How!

PS5 Sideways FAQs

• What Are PS5 Horizontal Dimensions? 

Ans: Your PS5 measures 15.4 × 10.2 × 4.1 inches. 

• Can I Keep The PS5 Vertical Without Stand? 

Ans: You can keep the PS5 vertical without the stand, but you shouldn’t. The stand is necessary for your PS5’s stability, whether it’s vertical or horizontal. 

• Is It Better To Put PS5 Horizontal Or Vertical?

Ans: It’s better to put the PS5 horizontally for the above reasons. 

• Can Keeping Your PS5 Vertical Cause Damage?

Ans: Yes, keeping your PS5 vertical causes damage to the console’s liquid metal layer between the APU chip and heat sink. 

• Is The PS5 Louder When Vertical?

Ans: No, there’s no difference in the sound produced by the PS5 if kept vertical (or horizontal). 

Related: PS4 vs. Xbox One: Which Console Is Right for You?

Conclusion

Here you go. Although it’s completely up to you how you plan to set your PS5, it’s recommended to keep it horizontally due to a major design flaw. It’s related to the liquid metal layer between the APU chip and the heat sink that ultimately affects your PS5’s cooling capacity. You don’t want that, do you? 

Thus, keep it sideways and enjoy. If you’re wondering how just follow the above steps. I’ve also proposed a PS5 horizontal stand if you need to buy one. 

How is your PS5 working horizontally? Share your experience in the comments below.

The post PS5 Sideways – All Your Questions Answered  appeared first on The WiredShopper.

• What if your preferred gaming device disappears?
• Does it offer tracking capabilities?

It is challenging to find if the Nintendo Switch lacks an internal tracker. Nevertheless, you can contact customer service and report the theft if you have the device’s serial number. Using their database, they may locate your device and assist you in locating and recovering it. 

How can you track your Nintendo Switch?

Let’s find out.

How to Track a Lost Nintendo Switch?

The Nintendo Switch doesn’t have a built-in tracker, making the prospect of losing or having it stolen much scarier. It would be far more challenging to recover it. As mentioned earlier, your device’s serial number is a potential lifesaver. 

Every Nintendo Switch, like practically all other electronic devices, has a unique serial number associated with the user’s account. Nintendo keeps a log of your online activities each time you link your device to the internet. Additionally, it records your location and IP address.

Therefore, you should get in touch with Nintendo customer support if you ever misplace your gadget. They’ll request your Switch’s serial number and other necessary documentation proving your ownership. They’ll assist you in tracking the device if you provide proof of ownership.

In addition, Nintendo offers various contact information based on location. Hence when you contact the support team, you will receive individualized assistance.

Related: How Much is Minecraft on Switch?

How to Find a Lost Nintendo Switch in Your House?

Sadly, you won’t be able to find your Nintendo alone. It doesn’t function like Apple’s “Find My” Phone. However, you may take some steps to get information about your Switch that the authorities can utilize to help you find it. 

As was previously noted, the serial number is essential for locating a lost Nintendo Switch. The number is on the back of the device, next to the USB-C connector. Additionally, you can find it in the System Settings list. You can also check the packaging. 

How to Find Your Nintendo Switch with Your Phone

Nintendo Switch doesn’t have a GPS or built-in tracker. As a result, you cannot track it by default. You can only use the device’s location settings to determine your area and time zone while playing online. 

But this is a common feature in Nintendo Switch and other game systems. There are no built-in trackers on other well-known systems like the Xbox and PlayStation. Despite lacking an internal tracker, you might still be able to locate your console. 

You may have to get a third-party tracking gadget. Such products are readily available for $20 to $40. These products are reasonably priced, considering that a Nintendo Switch console can cost up to $299. 

You only need to set up the little tracking chip for the third-party tracker on the device. It’d help if you didn’t worry about the trackers making the console heavier because they are typically lightweight (less than 15 ounces). After that, you can use your mobile phone to track the whereabouts of your Nintendo Switch from any location.

Enabling a third-party tracker is a wise precaution to take in case your console is misplaced or lost.

Nintendo Switch Tracker App

“Nintendo Switch online,”  the official Nintendo Switch app, keeps your device’s data once you link it to your account. It synchronizes your data between your Nintendo Switch, other Nintendo 3Ds, and Wii U devices.

The primary use of the software is to monitor playtime across all of your consoles. 

You can enjoy all three consoles’ features if you install this app. Nintendo Switch Online can still track a stolen device. This app’s information may benefit the authorities if your console has been stolen. 

The Nintendo app, however, only functions if you have already linked and synchronized the Switch to it and permitted it to view your information. Here are a few easy steps to download your Nintendo Switch Online membership codes.

1. Choose “Nintendo eShop” from the HOME Menu.
2. Decide which account to use.
3. On the screen’s left side, choose “Nintendo Switch Online.”
4. Choose “View/Change Membership” to view the current membership options and prices.

Can You Track a Nintendo Switch Lite?

If you misplace your Nintendo Switch lite indoors, a brief search can turn it up. However, finding it can be impossible if you lose it outside or it’s stolen. As previously mentioned, the best action is to contact Nintendo and submit your console’s serial number. 

They’ll aid in your search for looking up and tracking the serial number. If you take preventative steps in advance, such as installing a third-party tracker, you may have an easier time tracking it.

 Also, tag your Nintendo Switch lite with your information to safeguard against loss. 

Related: Switch Lite Won’t Turn On – Reasons And Solutions

Track Nintendo Switch by Serial Number

The most crucial component for tracing your Nintendo Switch is knowing its serial number. As mentioned earlier, you can locate the serial number in the System Settings menu on the console. 

You can also find it next to the USB-C connector at the bottom of the Switch.

• You can contact Nintendo customer service once you find your device serial number. 
• Please give them your serial number, and determine when the console was last online.
• They will locate the city and IP address.
• You can file a report with the police.

Can You Track a Nintendo Switch Game Card?

It can be challenging to locate a lost Nintendo Switch console inside your home or elsewhere, but it is nearly impossible to locate a lost Switch game card. The Switch game cartridges are easy to lose because they are so tiny. The only way to locate a misplaced Switch game is to search. 

You should carefully review the previous locations where you used your Switch. You should pay close attention to any crevices or cracks the game card might have slid into.

Also, if the game card is in your device, track the Nintendo switch IP. Contact Nintendo customer support and explain the situation if you want to find out how to trace the IP address of a Nintendo Switch. 

They might request extra information, such as the location of the device’s purchase or your login information. Then once you provide all the necessary data, they’ll search their database for the serial number. They can discover your device’s IP address and most recent usage history if it’s online and linked to the internet anywhere on the Planet. 

That is all the information you require. You can use the information to track your device or send it to the police so they can do it safely.

Can You Track a Nintendo Switch FAQs

Q. What Happens If I Lost A Switch Game?

The saved data will still be present on your device even if you misplaced the physical copy of a Switch game. However, to continue playing a game whose physical copy has been lost, you will need to purchase a new cartridge.

Q. Is There a Way to Find My Lost Switch?

There’s no tracking functionality available for the Nintendo Switch. The Switch doesn’t have a tracking feature, but you can still acquire third-party trackers for your device. It might be upsetting to lose something important, like a Switch and a game card. 

Q. Can a Switch be Blocked if Stolen?

Even if someone else has it in his possession, there is something we can do to feel more secure. A lost or stolen Nintendo Switch cannot be remotely blocked. However, we can unlink our account.

Finding a Lost Nintendo Switch

If you lose your Nintendo Switch, finding it may be challenging as it doesn’t come with a tracking device. However, you may contact Nintendo customer care to help you out. They’ll require you to provide proof of ownership, after which they may use your device’s serial number to locate it.

The post Can You Track a Nintendo Switch? Yes It is Possible appeared first on The WiredShopper.

So why does the Xbox Series X overheat? 

The Xbox Series X gets a little heated during prolonged gaming hours, and that’s normal. However, constant overheating, even during short gaming sessions, is problematic. One of the primary reasons for overheating is either the cooling fan inside the upper panel is not working, or it’s broken. Another reason could be that the console placement is not allowing it to get enough ambient air to cool itself. 

Overheating can slow down your console; at most, it can permanently damage some components. And I’m sure no gamer would want that. Read on to find the common reasons, solutions, and preventive measures for the issue. 

Why Does The Xbox Series X Have Overheating Issues? Most Common Reasons 

The root cause of Xbox Series X overheating is when the heat inside can’t exit the console properly. And the following are the two most common reasons that prevent the air from dissipating:

The Thermal Paste Is Not Spread Properly 

The primary purpose of the thermal paste is to filter out the heat from the processor. The thermal paste should be adequately spread on the CPU. When it’s not spread in the entire unit, it causes overheating. Note that the average user will not be able to repaste an Xbox. Furthermore, doing so would void the warranty.

Blocked Exhaust Grills And Side Panels

The second and most common reason for the Xbox Series X overheating issue is blocked exhaust grills and side panels. 

The exhaust grills and side panels help extract the heat produced by the Xbox Series X GPU & CPU. These parts are designed to maintain proper ventilation and temperature control. 

When these outlets get blocked by dust and other particles, the ventilation process fails, leading to overheating. 

Other reasons may include:

• Prolonged gaming sessions. For example, playing Call of Duty or Forza Horizon 5 for 12 hours straight.
• Poor positioning of the console, stored in an enclosed cabinet, covered up while using or under direct sunlight/warm room on a hot day.

Xbox Series X Overheating Symptoms 

Now that you know what causes overheating, let me help you find the symptoms. 

Constant Glitches 

Some potential symptoms of overheating include the game freezing in the middle or continuous glitches, slow loading, frame drops, etc.

Note that these problems can be caused by other factors as well. Hence, it’s difficult to determine whether these are caused only by overheating. 

The Cooling Fan Gets Too Noisy 

Is the cooling fan producing more noise than before? Note that if this continues, then it’s a sign of overheating. The cooling fan makes an unnecessarily loud noise because it tends to overwork to eliminate the sweltering air from inside the console. 

Don’t Ignore The Warning Message 

Your Xbox Series X gaming console shows a message saying- your console is getting too hot. People tend to ignore the message. It’s best to take immediate action when you see the warning sign. 

How To Prevent & Cure Your Xbox Series X From Overheating? Top Solutions To Your Rescue 

As a gamer, I know how frustrating it is to see your favorite console malfunctioning or, at worst, getting completely damaged due to overheating.

Hence, here are the preventive measures you can adopt to solve the problem.

Keep the Console In An Airy Place 

The gaming console will get a little hot while it’s operating. But the overheating issue escalates if you don’t put it in a well-aerated location. 

You can also place it near a fan so that it gets constant airflow. Or, if you have an air conditioner, turn it on while using it. But of course, this solution only applies to people living in warm states/countries.  

Another alternative is to place the console on a high platform and keep it away from other devices. Also, ensure that there is at least a 5 to 10-inch gap between the console and surrounding walls to allow proper air circulation. 

• Avoid putting the console on a rug or carpet that is too furry. It again prevents proper air ventilation.
• Please keep it on a stable, flat surface.
• Do not put it in an enclosed cabinet.
• Consider using energy-saving mode. It has helped some users.

Clean Your Xbox Series X 

As mentioned previously, dust and debris building up is another cause of Xbox Series X overheating. Hence, cleaning it occasionally is necessary for the cooling fan to work correctly. 

Clean the cooling fan using canned air. Canned air quickly removes all dust build-ups and ensures your console does not overheat. Alternatively, you can also use a feather duster to clean the console. 

Also, keep your console covered if you live in a “dusty environment” or have over-shedding pets

keep your console covered when not in use. 

Give The Console a Break

Even though the Xbox Series X is made to provide you with the ultimate gaming experience, it, too, needs some rest. Going on with longer gaming sessions for hours is neither good for the console nor you. 

Hence, let it rest for some time to prevent overheating and malfunctioning. 

Don’t Place The Console Under Direct Sunlight 

Prevent keeping your Xbox Series X under direct sunlight. Sometimes sun rays also make it heat up quickly. So place the console in a safe place where direct sunlight can’t reach. 

Xbox Series X Overheating FAQs

1. Is It Ok If My Xbox Series X Is Hot? 

Slight heat around the fans while you’re playing, is pretty standard. The fan ventilates the hot air from the console to keep other interior parts cool. But if it gets excessively hot, then it’s a problem. 

2. Can I Stop My Xbox Series X From Overheating By Turning It Off? 

Yes, turning off the console may help solve the overheating issue. Sometimes the device heats up during prolonged gaming sessions, so you must give it some rest. Leaving it off for at least one hour between prolonged gaming sessions can help.

3. Why Does My Xbox Series X Overheat While Playing Call Of Duty? 

It is quite normal for the Xbox Series X to become slightly warm under high workloads, like playing graphically demanding games. However, if your Xbox Series X is overheating when playing intense games for even a short period of time, then this is a problem that needs to be fixed.

Takeaway!

Slight heating is typical for any gaming console, and the Xbox Series X is no exception. But it’s only concerning if the device gets excessively hot regularly. 

Make sure you don’t overlook the symptoms and take immediate action to avoid significant damage.

The post Xbox Series X Overheating – Reasons And Solutions appeared first on The WiredShopper.

Learn more about the PS5 controller blinking blue and how to solve the problem.

Why Is My PlayStation Controller Flashing Light Blue?

A PS4 controller’s blue blinking light shows that it is trying to connect to a PS4 console or other Bluetooth devices. It should cease blinking shortly after the console is powered on. But if the issue continues, there are several quick and easy troubleshooting methods you may attempt. For instance, you could reset the controller to factory settings.

But first, let’s look at the reasons why your PlayStation controller keeps flashing blue:

• Power Supply Issues. Power supply failure, frayed cables, and general wear and tear are common causes of malfunction.
• Software Issues. Your PlayStation 4 controller may stop working if you’re using an outdated version of the software or if you encounter any bugs or glitches.
• Compatibility issues. Devices and combinations of devices that are not compatible with one another can occasionally lead to malfunctions.
• Hardware Issues. Your PlayStation 4 could power off unexpectedly and display a blinking blue light. That could be caused by loose screws, incorrectly positioned hard drives, or other mechanical issues.

Related: Why Does My PS5 Keep Turning Off? Reasons And Solutions

How Do You Fix a Blinking Blue Light on PS5 Controller?

To fix a blinking blue light on PS5 controller, try the following fixes:

Reset Your PS5 Controller

Here’s how to reset a PS5 controller:

• Turn the controller over and locate that tiny hole on the right of the brand name SONY®.
  
  

• Use a toothpick or paper clip to press the button.
• Press and hold it for 5 seconds.
• Click on the Select and Home (PS) buttons simultaneously
• Hold the buttons for 5 seconds

USB Cable

If resetting the PS5 controller is ineffective, you can use a Charge-Sync USB cable. Follow the steps below:

• Plug one end of the USB cable into the PS5 controller and the other end into the console.
• Press the Home (PS) button

You should be able to operate your PS5. 

If it doesn’t work, try this next fix.

Related: Best HDMI Cable for PS5

Use the PS App or Different Controller

Use a different PlayStation controller or the PS remote play application to connect to the PS5 console. Then follow the steps below:

• Go to Settings
• Click on Accessories
• Select General
• Click on Bluetooth Accessories
• Disconnect the Wireless Controller that’s not working by pressing X on it
• Click on Delete
• Select OK
• Put your PS5 console on Sync Mode by pressing and holding the Home and Select buttons simultaneously for 5 seconds
• Look for the controller under Accessories Found
• Scroll down using your working controller and click X on it

You should be able to connect to the controller now.

Tip: If the USB cable option did not work for you earlier, you could enable it on the Accessories Menu. Here’s how:

• Go to Controllers
• Select Communication Method
• Click on Use USB Cable

Other fixes you can try are:

Battery Charge

Confirm that the controller has enough juice to support the connection. To confirm, you only need to click on the PS button. It should appear on your screen.

Move or Turn Off other Bluetooth Devices

If you have other devices in the same room using Bluetooth, they can interfere with the pairing process. You also need to Forget the controller on your smartphone’s Bluetooth Paired Devices.

Related: Can You Connect Bluetooth Headphones to PS4 & PS5?

Update Firmware on PS5 Controller

Updates often come with improvements, new features, or even bug fixes. That’s why you need to update the PS5 to the latest version. You can do so using Settings.

Via Settings

Here’s how to update PS5 firmware via settings:

• Go to Settings
• Select System
• Click on System Software
• Hit System Software Update and Settings
• Click Update System Software
• Select Update Using Internet
• Click Update
• Hit OK

Update the PS5 Controller

Here’s how to update your PS5 controller:

• Disconnect the PS5 console from the internet. You could do that manually or turn off your Wi-Fi.
• Go to System
• Click on Date and Time
• Hit Set Manually
• Choose one day behind
• Click on OK
• Restart the PS5 console. You’ll see an update message on your screen once the console powers on
• Click on Update Now
• Click on System, then choose Date and Time
• Choose Set Automatically

PS5 Controller Flashing Blue, Then Turns Off

As explained in the previous section, your PS5 controller is flashing blue and then turns off because it is trying to pair to another device. But when it keeps flashing and turns off, there could be a problem. The culprits could be a faulty controller, outdated firmware, or a low battery.

Related: How to Connect PS5 Controller to iPhone

PS5 Controller Blinking Blue With PC

When your PS5 controller is blinking blue with PC, its probably because of the following reasons:

Low Controller Battery

If your controller has a low battery, it cannot allow a connection between your controller and PC. So you may need to charge the controller. However, you can still connect the controller to the PC using a charge-sync USB cable.

Bluetooth Interruption

If the Bluetooth connection is broken, the PS5 controller will not pair with the computer. The controller and the computer could be the source of the Bluetooth disconnect. 

Signal interference can occur if multiple Bluetooth devices are close to one another. If you want a reliable connection, aim to keep interference from signals to a minimum.

Controller Settings

The PS5 controller requires specific settings to function with a personal computer. The PC will mistakenly identify the device as a USB port if the controller settings are incorrect. You cannot use the controller with any video game when this happens.

PS5 Controller Blinking Blue 30 Times

The PS5 controller blinks blue 30 times because it is ready to pair with other Bluetooth devices. If, after a while, it does not connect to the PS5 console, then your controller could be experiencing connectivity issues. In that case, you can apply the fixes discussed in this article’s early sections.

PS5 Controller Blinking Blue 6 Times

If your PS5 controller is blinking blue 6 times and does not connect to the PS5 console:

• You may have a faulty controller.
• The PS5 console may require an update.
• You may have a low battery.

PS5 Controller Blinking Orange

The controller is blinking orange when: 

• The PS5 console is in Rest Mode.
• The controller battery is low. However, a warning message should appear on your TV before the orange color shows.
• It is charging. Once the charge is complete, the blinking stops.

PS5 Controller Not Connecting

Your PS5 is not connecting because:

• You’ve synced the controller with another Bluetooth device.
• A faulty USB cable. It would help if you used a suitable cable (charge-sync USB cable)
• The USB ports are damaged or dirty
• The battery is damaged
• Your Bluetooth sensor is damaged.
• The firmware needs an update.

The post PS5 Controller Blinking Blue – What Does It Mean? appeared first on The WiredShopper.